Everything you need to fit the hobbit stove into and existing chimney.
Kit includes, single skin flue pipe 500mm, steel register plate (600mm x 300mm) and fire cement.
If you are not lining your chimney then you will need to fix a register plate at the base of the chimney, or where appropriate depending on the particular stove installation and fix a pipe from the collar of the stove to just beyond the register plate. The register plate itself will need to be sealed in position to ensure that the air being drawn up the flue is going through the stove and not just passing up the sides of the plate. An access door if it can be configured in the register plate will allow for easier access and sweeping. Otherwise the flue pipe can be removed to allow deposits to be removed from the topside of the register plate periodically.
The stove fitting kit for this application includes; 500mm single skin pipe, 600mm x 300mm steel register plate, fire cement and fire rope.