Depending on the structure of the building or vehicle where you’re looking to install your small stove, you might need to offset your flue system at an angle. Our custom off set kit is designed for installations where you might have to exit through part of the roof which isn’t directly above your fireplace, or if you need your flue parts to be positioned further away from a combustible surface or a window, for example.

By installing your stove with this custom off set kit, you will also benefit from the extra heat that will be radiated from your single wall flue pipes. By purchasing a set of elbows, you will be able to step your flue parts to either side or towards the back of your tiny stove. Our custom off set kit is also entirely customisable – you are able to select a set of 15 degree, 30 degree or 45 degree elbows, and you can also choose to add one or more pieces of flue pipe to your installation kit. Joint clips are included with this flue kit as standard, and you can also choose to add an inspection door to your flue, which makes it much quicker and easy to inspect, clean and maintain your flue system. Please note that the 15 degree elbows cannot be fitted with an inspection door.

If you’re unsure of the distances that you will need to maintain when it comes to installing your stove, then you can find a range of documents in our help section that will guide you through this process. You can also take a look through some of our case studies to see how other people have installed their small stove with an offset flue system.