Custom Off Set Kit
Our custom off set kit contains the main flue components that you will need to install your small stove into a building or vehicle where you will need the flue pipes to be offset at an angle.
Our small stoves have a 4” flue outlet, and we use 4”/100mm diameter single wall flue. If you would like a flue kit with a 5″/125mm sizing, then please specify this in the order note.
Please note that our stove is not included with this installation kit. This installation kit has been designed for a non-domestic setting. Please contact us if you have any questions about this.
Please select your set of elbows from the options below. Joint clips are included. You can choose to only purchase two elbows, or you can also add one or more pieces of single wall flue pipe to your order. You also have the option to add an inspection door to your flue if desired.
Please note that the 15 degree elbows cannot be fitted with an inspection door.
Please note that any new orders for flue parts could take up to 10 working days to be delivered. If you need flue parts before this, then please do not hesitate to contact us to discuss availability.
Depending on the structure of the building or vehicle where you’re looking to install your small stove, you might need to offset your flue system at an angle. Our custom off set kit is designed for installations where you might have to exit through part of the roof which isn’t directly above your fireplace, or if you need your flue parts to be positioned further away from a combustible surface or a window, for example.
By installing your stove with this custom off set kit, you will also benefit from the extra heat that will be radiated from your single wall flue pipes. By purchasing a set of elbows, you will be able to step your flue parts to either side or towards the back of your tiny stove. Our custom off set kit is also entirely customisable – you are able to select a set of 15 degree, 30 degree or 45 degree elbows, and you can also choose to add one or more pieces of flue pipe to your installation kit. Joint clips are included with this flue kit as standard, and you can also choose to add an inspection door to your flue, which makes it much quicker and easy to inspect, clean and maintain your flue system. Please note that the 15 degree elbows cannot be fitted with an inspection door.
If you’re unsure of the distances that you will need to maintain when it comes to installing your stove, then you can find a range of documents in our help section that will guide you through this process. You can also take a look through some of our case studies to see how other people have installed their small stove with an offset flue system.