Wall Exit Kit 1
This flue kit has all of the components that you will need to install your small stove in a space where you will need the flue pipes to exit through the wall at a 45 degree angle. This installation kit includes the following components:
- 1x 1000mm of single wall flue pipe (black finish)
- 1x 45 elbow in single wall flue (black finish)
- 1x Joint clip
- 1x Adaptor – single wall to twin wall flue
- 1x 500mm of twin wall flue pipe
- 1x 45 elbow in twin wall flue
- 1x 800mm of twin wall flue pipe
- 2x 500mm of twin wall flue pipe
- 1x Rain cap cowl
- 2x Trim plate
- 2x Wall band
- 1x Cartridge of fire cement
- 1x Cartridge of heatproof silicone sealant
Our small stove has a 4” outlet, and we use 4”/100mm diameter single wall flue. If you would like a flue kit with a 5″/125mm sizing, then please specify this in the order note.
Please note that our stove is not included with this installation kit.
This wall exit kit is a great option if you are looking to install your small stove into a shed or other small space where you might not want to exit through the roof. If the wall that you are looking to exit through is more than 100mm thick then this is the wall exit kit that you will need. This installation kit enables your flue parts to exit through your wall at a 45 degree angle, and you will also benefit from the additional heat which is radiated by the single wall flue pipe inside your small space.
On the other hand, if you’re looking to get stuck into some wood-fired stovetop cooking then it’s worth having a look at Wall Exit Kit 2. This small stove installation kit is configured with our rear exit kit. This liberates the entirety of your stovetop, which gives you more space for you to use a kettle or any pans with your small stove. You can also add a stainless steel cooktop option to your Hobbit stove, which allows you to cook at a range of temperatures on your stovetop. This additional stove option also helps to prevent any abrasion to your stovetop which can be caused by your pans, and it’s also removable, which makes it quick and easy to clean.
Do I need an AD cowl?
If your structure is surrounded by trees or other buildings, then there might not be a consistent flow of air across the top of your flue. On stormy days you might experience down draught problems, where the flue draw momentarily stops. This can potentially lead to smoke being blown back into the stove. To eliminate this, the rain cap which is included in this flue kit can be swapped for an anti-down draught cowl.
Don’t forget to also check out our case studies page to see how other people have incorporated a wall exit kit into the design of their small space!