
Wall Exit Kit 2
£785.00 inc.VAT
This flue kit has all of the components that you will need to install your small stove in a space where you will need the flue pipes to exit through the wall at a 90 degree angle. This installation kit includes the following components:
- 1x Adaptor – single wall to twin wall flue (100mm/4″ internal diameter to 125mm/5″ internal diameter)
- 2x Flat trim plates
- 1x 150mm of twin wall flue pipe (125mm/5″ internal diameter)
- 1x 90 T and cap in twin wall flue (125mm/5″ internal diameter)
- 1x 500mm of twin wall flue pipe (125mm/5″ internal diameter)
- 2x 1000mm of twin wall flue pipe (125mm/5″ internal diameter)
- 1x Wall band (to suit 125mm/5″ internal diameter TW flue)
- 1x Rain cap cowl (125mm/5″ internal diameter)
- 1x Wall support
- 1x Cartridge of fire cement
- 1x Cartridge of heatproof silicone sealant
Our small stove has a 4” outlet, and we use 4”/100mm diameter single wall flue. If you would like a flue kit with a 5″/125mm sizing, then please specify this in the order note.
Please note that our stove is not included with this installation kit. The adaptor cannot be black powder-coated for this flue kit, so it will have a stainless steel finish. This installation kit has been designed for a non-domestic setting. Please contact us if you have any questions about this.
Please note that any new orders for flue parts could take up to 10 working days to be delivered. If you need flue parts before this, then please do not hesitate to contact us to discuss availability.
This flue kit is not compatible with our Little Range Cook Stove or any other appliance which is top-exit only.
This wall exit kit is a great option if you are looking to install your small stove into a shed or other small space where you might not want to exit through the roof. If the wall that you are looking to exit through is more than 100mm thick, then this is the wall exit kit that you will need. This kit enables you to exit directly from your stove at a 90 degree angle. This kit is particularly useful for any buildings or dwellings where you might be a bit tight on space, as you will not have to arrange your flue parts around as many combustible materials or windows inside your small space. The flue parts will exit through your wall before going straight up outside of the structure in twin wall flue.
This flue kit will exit at the rear of your small stove with the use of our rear exit kit, and this liberates the top of our little wood stove so that you have more space for cooking or boiling a kettle. You can also add a stainless steel cooktop option to your Hobbit stove, which allows you to cook at a range of temperatures on your stovetop. This additional stove option also helps to prevent any abrasion to your stovetop which can be caused by your pans, and it’s also removable, which makes it quick and easy to clean.
Do I need an AD cowl?
If your structure is surrounded by trees or other buildings, then there might not be a consistent flow of air across the top of your flue. On stormy days you might experience down draught problems, where the flue draw momentarily stops. This can potentially lead to smoke being blown back into the stove. To eliminate this, the rain cap which is included in this flue kit can be swapped for an anti-down draught cowl.
You can click here to read more about our wall exit kit, and on this page you can also watch a video to see how we used this flue kit to install one of our Hobbit stoves. Don’t forget to also check out our case studies page to see how other people have incorporated a wall exit kit into the design of their small space!