Shed Flue Kit 1
This kit contains all of the components that you’ll need to install your small stove into a shed with a metal roof. This installation kit includes the following parts:
- 1 x 1000mm length of single wall flue pipe (black finish 100mm/4″ internal diameter)
- 1 x 500mm length of single wall flue pipe (black finish 100mm/4″ internal diameter)
- 1 x Joint clip
- 1 x Adaptor – single wall to twin wall flue (100mm/4″ SW to 125mm/5″ TW)
- 1 x 1000mm length of twin wall flue pipe (125mm/5″ internal diameter)
- 1 x Wall band (to suit 125mm/5″ internal diameter TW)
- 1 x Flat trim plate (to suit 125mm/5″ internal diameter TW)
- 1 x Silicone flashing and fixing kit
- 1 x Storm collar (to suit 125mm/5″ internal diameter TW)
- 1 x Rain cap cowl (125mm/5″ internal diameter)
- 1 x Cartridge of fire cement
- 1 x Cartridge of heatproof silicone sealant
Our small stove has a 100mm/4” outlet, and we use single wall flue with a 100mm/4″ internal diameter. If you would like a flue kit with 125mm/5″ single wall, then please specify this in the order note. Our twin wall flue has a stainless steel finish as standard.
Please note that our stove is not included with this installation kit. This installation kit has been designed for a non-domestic setting. Please contact us if you have any questions about this.
Please note that any new orders for flue parts could take up to 10 working days to be delivered. If you need flue parts before this, then please do not hesitate to contact us to discuss availability.
The flue parts in this installation kit have been designed to exit straight up through the roof of your shed, which is the most straightforward and affordable way to install one of our tiny stoves into your small space.
This flue kit has all of the components that you’ll need for installing a small stove into a shed with a metal roof. The flue kit starts with a 1 metre length of single wall flue pipe, which connects to another length of 500mm single wall flue. This in turn connects to an adaptor, which converts into twin wall flue. Your length of twin wall flue exits from the inside of the shed to the outside. The twin wall flue is held in place by a wall band support.
If you’re looking to get stuck into some wood-fired stovetop cooking, then it’s worth configuring your flue kit with our rear exit kit or our rear flue wedge. This liberates the entirety of your stovetop, which gives you more space for you to use a kettle or any pans on the top of your small wood burning stove. You can also add a stainless steel cooktop option to your Hobbit stove, which allows you to cook at a range of temperatures on your stovetop. This additional stove option also helps to prevent any abrasion to your stovetop which can be caused by your pans, and it’s also removable, which makes it quick and easy to clean.
Do I need an AD cowl?
If your shed is surrounded by trees or other buildings, then there might not be a consistent flow of air across the top of your flue. On stormy days you might experience down draught problems, where the flue draw momentarily stops. This can potentially lead to smoke being blown back into the stove. To eliminate this, the rain cap which is included in this flue kit can be swapped for an anti-down draught cowl.
You can click here to read more about how to install our tiny stove in a shed or another small space, and you can also watch this video to guide you through the process! Don’t forget to also check out our case studies page to see how other people have incorporated our small stove into the design of their shed!