Canal Boat Flue Kit 2
£585.00 inc.VAT
This canal boat installation kit combines traditional styling with high quality, traditionally spun, British-made flue parts, which have been black powder coated. It contains all of the components that you will need to install a small stove in a canal boat. This installation kit includes the following components:
- 1x 250mm of single wall flue pipe (black finish)
- 1x Adaptor – single wall to twin wall flue
- 1x 1000mm of twin wall flue pipe (black finish)
- 1x 500mm of twin wall flue pipe (black finish)
- 1x 300mm of twin wall flue pipe (black finish)
- 1x Wall band
- 1x Flat trim plate
- 1x Collar support
- 1x 3 piece deck collar
- 1x Deck collar cover
- 1x 500mm of twin wall flue pipe (black finish)
- 1x Rain cap cowl (black finish)
- 1x Closure cap (black finish)
- 1x Cartridge of fire cement
- 1x Cartridge of heatproof silicone sealant
Our small stove has a 4” outlet, and we use 4”/100mm diameter single wall flue. If you would like a flue kit with a 5″/125mm sizing, then please specify this in the order note.
Please note that our stove is not included with this installation kit, and the bolts for the boat rings are not included with this kit. This installation kit has been designed for a non-domestic setting. Please contact us if you have any questions about this.
Please note that any new orders for flue parts could take up to 10 working days to be delivered. If you need flue parts before this, then please do not hesitate to contact us to discuss availability.
Out of stock
This canal boat flue kit provides an attractive, safe, and efficient solution for installing our small stove in a canal boat, Dutch barge, or wide beam boat. It can be installed in accordance with BS:8511:2010, (which requires the flue exiting the cabin to be twin wall insulated) and it provides a more traditional appearance to the flue parts which are visible above and below deck. Due to this canal boat flue kit having more insulated twin wall flue in comparison to Canal Boat Flue Kit 1, this flue kit is great if you’re installing your small stove in a more confined space. The flue gases will also be kept warmer, and therefore the draw should also be better.
If you’re looking to get stuck into some wood-fired stovetop cooking then it’s worth contacting us to help you configure your flue kit with our rear exit kit. This liberates the entirety of your stovetop, which gives you more space for you to use a kettle or any pans with your small stove. You can also add a stainless steel cooktop option to your Hobbit stove, which allows you to cook at a range of temperatures on your stovetop. This additional stove option also helps to prevent any abrasion to your stovetop which can be caused by your pans and it’s also removable, which makes it quick and easy to clean.
Alternatively, if you’re just looking to use your stovetop to heat up a kettle or a pan, then you might want to consider our gallery rail option for your small stove. This will enable you to safely cook some food or boil a kettle on your stovetop whilst you travel, as your kettle or pan will remain secure on your stovetop as you chug along!
Do I need an AD cowl?
If your canal boat is surrounded by trees or other buildings, then there might not be a consistent flow of air across the top of your flue. On stormy days you might experience down draught problems, where the flue draw momentarily stops. This can potentially lead to smoke being blown back into the stove. To eliminate this, the rain cap which is included in this flue kit can be swapped for an anti-down draught cowl.
Don’t forget to also check out our case studies page to see how other people have incorporated our small stove into the design of their canal boat!
