100mm Twin Wall Insulated Flue – Appliance Connector Black
£58.00
This 100mm/4″ diameter appliance connector is made from twin wall insulated flue, and it has a beautiful black powder coated finish. It’s manufactured to the highest specification by Midtherm, which is a family-run business based in the UK. This flue part can be used to connect single wall flue parts to twin wall flue components.
PLEASE NOTE: this piece cannot be used directly onto a stove due to the proximity to the stove and the black powder coating on the flue part. If you would like to have a fully twin walled black flue kit, you will need to choose a stainless steel appliance connector and opt for a black locking band.
Midtherm flue parts are only compatible with other flue parts from the Midtherm range. Please note that any new orders for flue parts could take up to 10 working days to be delivered. If you need flue parts before this, then please do not hesitate to contact us to discuss availability.
Product description
This 100mm Twin Wall Insulated Flue – Appliance Connector Black works brilliantly with your Hobbit stove, Hobbit SE or Little Range Cook Stove! This piece can be fitted onto a section of single wall flue, if your system needs to step up into 100mm/4″ twin wall insulated flue. PLEASE NOTE: this piece cannot be used directly onto a stove due to the proximity to the stove and the black powder coating on the flue part. If you would like to have a fully twin walled black flue kit, you will need to choose a stainless steel appliance connector and opt for a black locking band.
Our twin wall insulated flue pipes can also be used as part of an installation kit. Twin wall flue parts tend to be used outside of your chosen structure, and just before your flue system exits your room. However, using twin wall flue inside your campervan, shepherd’s hut, tiny home, canal boat, yurt or horse box will enable you to position your flue system much closer to combustible materials, which is particularly useful if you’re tight on space!
Twin wall flue parts can be placed just 50mm away from combustible materials, whereas single wall flue will need to be placed at least 3 times its diameter away from combustible materials, and 1.5 times its diameter away from non-combustible materials. This means that our 100mm/4” single wall flue pipes will need to be situated at least 300mm away from a combustible surface, and at least 150mm away from a non-combustible surface.
If you need your flue system to exit through the wall of your small space – rather than through the roof – then we’ve designed two different wall exit kits, which both utilise twin wall flue parts. Using one of these flue systems is also a great solution if you’re looking to install your small wood burning stove into a kitchen, where you might not be able to connect to a chimney.
You can take a look through our case studies to see how other people have installed their small wood burning stove, and you can check out our blog for lots of useful articles and videos which will guide you through your installation process. If you’re still stuck, then please feel free to contact us, as we offer a bespoke flue consultancy service free of charge to help you install your Hobbit, Hobbit SE or Little Range Cook Stove into your chosen space!
