Need help deciding what flue you need?
Use our bespoke flue design service and we can make sure you do not waste money buying flue parts you do not need. You may have a project where the stove installation kits we have available do not match your individual requirements. If this is the case then please contact us directly and we can put our bespoke flue design service in to action. Provide us with a couple of pics and dimensions and we will prepare a technical drawing of your particular installation.
This can be used to cross reference and check the installation details, ensuring that you are happy it is exactly what you need. This drawing also then gives a much clearer idea of how the box of components go together when the flue kit arrives. Below is a typical drawing. This one showing an installation in a cabin/garden room which had a turfed roof.
Please contact us to discuss your individual Hobbit installation flue requirements and we will do our very best to help make it as straightforward as possible.
Bespoke Flue Design Service
Good afternoon, please could I take advantage of your flue design service. We are restoring a showmans caravan and wish to install a hobbit stove but have an issue with taking the flue through the existing ceiling hole. Having removed the old asbestos flue, we find the roof hole is approx 5 and 3/4 inch diameter and don’t think is big enough to take a twin wall flue. The roof is curved and the roof hole has a lip around which I don’t really want to mess with. There is approx 2 inch gap between ceiling and roof which is filled with polystyrene sheet insulation. Have some photos which I could email across if you forward an email address. Notice you have an August offer which we would like to take advantage of if it works or bespoke system if needed? Thanks, kind regards, Alan
Please send me some pics to mark@salamanderstoves.com and I will work out what potentially can be sorted for you:)