Everything you need to fit the Hobbit stove into a canal boat.
We have designed this canal boat stove installation kit to be a happy blend of the BS: 8511 Advisory standard for fitting stoves on boats with an eye on maintaining the traditional feel of the flue kit above deck. This is powder coated black. It is therefore a blend of single skin flue pipe from the stove, converting approximately 150 mm from the exit point into twin wall insulated flue pipe. This twin wall insulated flue pipe exits the cabin through the void and connects to a removable top section above the cast iron deck flange and storm collar. Where the single skin pipe is closer than 300 mm to a combustible surface then this will need to be shielded or an additional length of the twin wall flue added to this kit. This twin wall section is supported by a close fitting collar which fits over the pipe and is sandwiched between the top two layers of the deck flange. This then connects with the adaptor which in turn connects to the tapering black powder coated top section. There is a powder coated plug and a powder coated rain cap for either operation, removal or closure.
Read our case study on fitting the hobbit small stove into a canal boat
The Canal Boat Stove Fitting kit includes
|1||1000 mm single skin|
|2||15 degree elbows|
|1||single to twin adaptor|
|1||300 mm twin wall length|
|1||3pc cast iron deck flange|
|1||tapered powder coated black removable pipe|
|1||powder coated rain cap|
|1||powder coated winter closure stub cap|
|1||powder coated spun storm collar|
|1||heat proof silicone|